@emil I installed the Home+ 5 app. When I go through bridges and then display accessories, it works fine with the flic buttons. I think there are some bugs in the iOS 15.3 button/switch portions of the home app.

@emil Thanks. I'll contact Apple.

When I go into Home Settings/Home Hubs & Bridges/[Room] Flic Hub, it shows the count of Flic buttons. When I click on "accessories," the screen is blank. On my other HomeKit hubs I do see the accessories attached to those hubs. It is only the Flic hub that doesn't show accessories.

I made some progress on this issue. I deleted the single press action of the flic button from the HomeKit home app. Then I single pressed the flic button. The "non-existent" HomeKit single press action was triggered and the device was toggled from off to on.

This confirmed my suspicion that the action was running twice. It appears that the HomeKit hub was running both the deleted action and the configured action.

When I change the Flic Hub HomeKit room after going into the button settings and selecting Bridge, the room does not update. Also, clicking on the "accessories" for the hub shows a blank list.

I was able to change the Flic Hub room by going into home settings, selecting "Home Hubs & Bridges" and then selecting "[Room] Flic Hub." Although the screen looks the same as the screen shown when looking at the bridge via the button settings, the screen accessed by the home settings does change the room properly.

I have my Flic Hub LR connected via ethernet switch. I'd like to turn off the hub's WiFi radio to reduce WiFi signals. Can a new setting be added to the hub settings screen to turn off the Wifi radio on the hub?

I used a HomeKit shortcut to see if my eve energy plug is on. If on, the single flic2 press turns the eve plug off. If the eve plug is off, the shortcut turns the plug on.

This worked the first day I programmed it. The second day and later, if the plug is on, it turns off and then rapidly turns back on. If the plug is off, it turns on and then rapidly turns back off.

When I test the shortcut on the phone, it runs fine. It almost seems like the shortcut is running twice in quick succession. Does anyone have any ideas as to what is not working?